Advanced Filters
Category
Manufacturer
600 VAC
120-480 VAC
50/60 HZ
Removed from:
85 Ton Van Dorn Injection Molding Machine
Model: ...
$22 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
60 Oz Shot Size
3.15" (80 mm) Screw Diameter
20,400 PSI Injection Pressure
14.31" Injection St...
$8,950 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
65.39 Oz Shot Size
3.543" (90 mm) Screw Diameter
19,034 PSI Injection Pressure
12.6" Injection...
$5,995 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
900 Lbs per Hour Max Blending Capacity
60.00 PSIG Max Regulator Air Pressure
115 Main Volt
Sin...
$12,950 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
Shaft Size: 1 7/8" Long
1.25" Diameter
3.5" Inlet
4.75" x 3.75" D Hole Center to Center
Buyer...
$295 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
32-BIT HW Vers 1.0 Expedited shipping services are available This piece is located at Ideal Machi...
$62 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
01-006-322-D
DI32W
06715565
Removed from: 210 Ton Van Dorn Injection Molding Machine Model: 21...
$62 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
01-002-122-D
Removed from: Van Dorn
Model: 210HTG720
Serial: 1108
Expedited shipping services...
$84 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
5-4WE-10-E121A33/CG24N9K4 SO32 Removed from: 85 Ton Ferromatik Milacron Injection Molding Machine...
$90 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
24 VDC
600 VAC
LOAD RESISTIVE
Removed from:
85 Ton Ferromatik Milacron Injection Molding Mach...
$28 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
EKS-712-97182 Shell: 500 psi Shell: 150psi Pressure Tested/ Fluids Drained Approx. Dims: 16" x 5"...
$399 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
5037989
Removed from:
85 Ton Ferromatik Milacron Injection Molding Machine
Model: VV85-2.27
S...
$599 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.












