Advanced Filters
Category
Manufacturer
Shaft Length: 3 3/8"
Shaft Diameter: 49.07 mm
with Daikin Valve
Model: ESC-02-10
with Daikin ...
$1,495 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
AA10V9045DFR1/30R PKC62K03 Shaft Length: 1 5/8", Diameter: 28 mm Removed from: 55 Ton Engel Injec...
$299 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
SYDFE1-20/028R-PPA12N00-0000-A0X0XXX 1.5" Shaft Length 0.86" (22 mm) Shaft Diameter w/ Rexroth Va...
$2,045 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
320 Watts 400 VA 50/60 Hz Powered on, tested good Expedited shipping services are available This ...
$140 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
35V30A11D22R Removed from: 300 Ton Van Dorn Injection Molding Machine Model: 300RS-20FHT Serial: ...
$399 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
Shaft Length: 2 1/2"
Shaft Diameter: 31.60 mm
Removed from:
650 Ton Van Dorn Injection Molding...
$349 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
Shaft Length: 3"
Shaft Diameter: 1 1/4"
84067309
Removed from:
610 Ton Toshiba Injection Mold...
$2,250 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
w/o Mounting Hardware Volt: 230 Watt: 700 Approx. Inner Diameter: 6" Approx. Width: 1 1/2" 3 Phas...
$39.99 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
0.2-0.7 MPa 24 VDC F10T0-CPL3 (4) F10T2-CPL3 (4) Expedited shipping services are available This p...
$49 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
3" Max. Press 250 psi, 1.70 mA Expedited shipping services are available This piece is located at...
$350 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
Series T Nema Type 4,13 With 800T-XA, Series D Expedited shipping services are available This pie...
$20 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
Inner Diameter: 4 1/4" Mounting Hole Diameter: 5/8" Removed from: 120 Ton Van Dorn Injection Mold...
$99 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.