Advanced Filters
Category
Manufacturer
Part No.: 28509-0020
Expedited shipping services are available upon request.
All taxes due are ...
$99 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
120 Volt
1 Amp
Tested Good
Expedited shipping services are available upon request.
All taxes ...
$495 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
180 Volt 840 VA 50/60 Hz Single Phase Removed from: 60 Ton Mitsubishi Injection Molding Machine M...
$200 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
Removed from: 165 Ton JSW Injection Molding Machine Model: J165EII-A Serial: 296302428 Expedited ...
$199 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
14.7 Oz Shot Size
1.97" (50 mm) Screw Diameter
23,757 PSI Injection Pressure
8.9" Injection St...
$4,995 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
Removed from: 500 Ton Van Dorn Injection Molding Machine
Buyers are welcome to inspect equipment...
$3,950 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
Staffa Screw Motor
26046
26677
B100
Buyers are welcome to inspect equipment prior to purchase...
$3,950 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
Removed from:
230 Ton Van Dorn Injection Molding Machine
Model: 230RS-20FTHT
Serial: 436
Buye...
$1,295 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
Removed from:
230 Ton Van Dorn Injection Molding Machine
Model: 230HT1220
Serial: 1144
Buyers...
$499 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
1.5 HP Pump
10 KW
240 Volt
3 Phase
60 Hz
13.53 F.L. Amps
Buyers are welcome to inspect equi...
$1,295 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
59.8 mm Opening
Removed from:
85 Ton Engel Injection Molding Machine
Model: ES80/85
Serial: 5...
$349 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
Removed from:
400 Ton Van Dorn Injection Molding Machine
Model: 400-HT-30
Expedited shipping s...
$295 (USD)