Advanced Filters
Category
Manufacturer
10 Ton
Water Cooled
410A Refrigerant
460 Volt
3 Phase
60 Hz
24.82 F.L. Amps
**No Internal ...
$6,950 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
MAGUIRE/ NOVATEC
6 Component Blender
Throughput Capacity: Up to 3200 lbs per hour
Single Phase...
$9,995 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
Desiccant Dryer
200 Lbs. Per Hour
460 V, 3 Phase
Filter: yes
Buyers are welcome to inspect eq...
$1,995 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
1000 lb Capacity
Buyers are welcome to inspect equipment prior to purchase.
Expedited shipping ...
$3,250 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
2 Ton Air Cooled Chiller
Model Number: EQ2A02
Serial Number: 27936011802
Voltage: 460 / 3 / 60...
$4,950 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
AC Servo Motor
Input: 200 VAC, 3 Phase, 93.1 Amp
Rated Rev.: 1000 r/min
Rated Freq.: 66.7 Hz
...
$4,950 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
75.94 mm Diameter Inlet / Outlet Top Flange Approx.
7.5" x 7.5" Top Flange
5" x 5" Center to Ce...
$399 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
56.75 mm Diameter Inlet / Outlet Top Flange Approx.
7" x 7" Top Flange
50.67 mm Diameter Inlet ...
$399 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
700 Series Ratings for 1.0 SF @ 1750 RPM .54 HP Input 687 lb/in Output Torque 50:1 Ratio 2.25" Sh...
$160 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
700 Series Ratings for 1.0 SF @ 1750 RPM .54 HP Input 687 lb/in Output Torque 50:1 Ratio 2.25" Sh...
$160 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
Shaft Length Approx.: 2 7/8" Shaft Diameter Approx.: 20 mm w/ Oriental Motor Induction Motor Mode...
$340 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
600 Volt 70 Amp 60/75°C Wire 3 Pole Removed from: 230 Ton Van Dorn Injection Molding Machine Expe...
$125 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.