Advanced Filters
Category
Manufacturer
Removed from: 310 Ton Toshiba Injection Molding Machine Model: ISF310SII-19A Serial: 315311 Exped...
$299 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
Removed from: 310 Ton Toshiba Injection Molding Machine Model: ISF310SII-19A Serial: 315311 Exped...
$299 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
8.1 Oz Shot Size
1.57" (40 mm) Screw Diameter
26,600 PSI Injection Pressure
320 RPM Screw Spee...
$1,995 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
30 Oz Shot Size
2.36" (60 mm) Screw Diameter
28,500 PSI Injection Pressure
210 RPM Screw Speed...
$4,250 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
41 Oz Shot Size
2.76" (70 mm) Screw Diameter
21,000 PSI Injection Pressure
180 RPM Screw Speed...
$5,495 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
48 Oz Shot Size
2.76" (70 mm) Screw Diameter
25,900 PSI Injection Pressure
180 RPM Screw Speed...
$6,450 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
63 Oz Shot Size
3.15" (80 mm) Screw Diameter
19,800 PSI Injection Pressure
170 RPM Screw Speed...
$6,950 (USD)
Ratings Per Pole: 35 Amps @ 600 VAC Res. Coil: 120 Volt, 50/60 Hz Dimensions: 3 3/4 x 3 1/2 x 2 1...
$23 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
Model: LF100-400-RBR Expedited shipping services are available This piece is located at Ideal Mac...
$72 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
15 Amp 110-120 Volt 50/60 Hz Tested Good Expedited shipping services are available This piece is ...
$199 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
OMP 160 151-70657
Shaft: 1 3/4" Removed from: 33 Ton Cincinnati Milacron Injection Molding Machi...
$200 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
Model: DG4V32AMUH760 350 Bar (5000 PSI) Dimensions: 6 1/8 x 2 1/2 x 1 7/8 Weight: 3 lbs, 8 oz Rem...
$47 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.