Advanced Filters
Category
Manufacturer
Model: Z-16069 Expedited shipping services are available This piece is located at Ideal Machinery...
$22 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
TOP
Flange: 8 1/4" x 8 1/4"
Inlet Diameter; 127 mm
Bolt Hole Pattern, Center to Center: 6 1/2"...
$399 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
21" Stroke
45 mm Shaft Diameter
48" Shaft Length
Removed from:
450 Ton Engel Injection Moldin...
$1,495 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
TOP
Inlet: 4" Diameter
Flange: 8 3/4" x 8 3/4"
5 1/2" & 5 1/2" - Bolt Hole Patter, Center to C...
$895 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
TOP
7 1/4 X 7 FLANGE
Bolt Holes, Center to Center: 5"
Inlet Diameter: 77 mm
BOTTOM
7" x 6 1/...
$399 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
2 HP Pump
18 kW Heater
150 PSIG Max Pressure
230 Volt
3 Phase
60 Hz
Heaters Ohmed
Tested G...
$2,950 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
SpectraLight
Series No. 60006
2000 Watts
120 Volt
60 Hz
Tested Good
Buyers are welcome to i...
$1,250 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
Model: DCG-01-2B2-4018 Dimensions: 6 x 3 3/4 x 2 1/8 Weight: 2 lbs, 9 oz Removed from: 75 Ton Sum...
$70 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
Model: DCG-01-2B2-4017 Removed from: 30 Ton Sumitomo Injection Molding Machine Expedited shipping...
$41 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
Model: DCG-01-2B2-4017 Removed from: 30 Ton Sumitomo Injection Molding Machine Expedited shipping...
$41 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
Model: DCG-01-2B2-4017 Removed from: 30 Ton Sumitomo Injection Molding Machine Expedited shipping...
$41 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
Model: DCG-01-2B2-4017 Removed from: 30 Ton Sumitomo Injection Molding Machine Expedited shipping...
$41 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.