Advanced Filters
Category
Manufacturer
500 PSI Shell Operating Pressure 150 PSI Tube Operating Pressure 250°F Temperature 2 Port Diamete...
$399 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
*Pressure Tested* Approx. Dimensions: 23" x 8" x 9" Removed from: 85 Ton Van Dorn Injection Moldi...
$795 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
Approx. Dimensions: 27" x 6" x 9" Removed from: 120 Ton Toshiba Injection Molding Machine Model: ...
$695 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
1.75" Inlet / Outlet Removed from: 250 Ton Cincinnati Milacron Injection Molding Machine Model: V...
$695 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
Shell & Tube, Air Cooled, Plate Ac Dims 22 3/4 x 9 x 7 3/4 Pressure tested OK Approx. Dimensions:...
$795 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
Type: 500 Inlet / Outlet: 2" Rust on unit Approx. Dimensions: 43" x 7.5" x 7" Expedited shipping ...
$295 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
181-2-04-120-01 12587 33787A 1-120-7-0-4 Approx. Dimensions: 18.5" x 5.25" x 10" Expedited shippi...
$363 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
Pressure Tested 500 PSI Shell Operating Pressure 150 PSI Tube Operating Pressure 250°F Temperatur...
$399 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
10 kgf/cm2 Shell Side Pressure 25 l/min Minimum Water 2.0 m2 Surface 7 kgf/cm2 Tube Side Pressure...
$399 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
Approx. Dimensions: 19" x 7" x 9" Removed from: 80 Ton Nissei Injection Molding Machine Model: FS...
$299 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
16/21 Bar Nominal Test Pressure 95°C Temperature SF-Cu Material *Pressure Tested* Approx. Dimensi...
$495 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
Approx. Dimensions: 27.5" x 10" x 6 7/8" Expedited shipping services are available This piece is ...
$363 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.